Hover
Hover
Hover
Hover
$174.99
Product has been discontinued
This is a replacement assembled Heatsink, Laser Diode, and Cooling fan **DOES NOT INCLUDE AIR ASSIST ASSEMBLY OR DRIVER**
Out of stock
Laser Diode Assembly Specifications |
|
| Operating Current | 4.5 @ 25°C |
| Threshold Current | 150 – 350mA |
| Operating Voltage | 3.7 – 5.2V @ 2.3A |
| Optical Output Power | 7W+ |
| Wavelength | 445nm |
| Package | TO-5 |
| Estimated Lifespan | 10,000 hours |
| Storage Temperature | -40°C – 85°C |
| Operating Temperature | 0 – 60°C |
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 5 × 5 in |
The LaserBeam and any other laser device can cause harm to you or others. Ensure that you follow these safety guidelines
Never let the laser run unattended
Ensure that you have a fire suppression system such as a fire extinguisher nearby in case of a fire. Never leave your laser unattended. Ensure that your laser is turned off when not in use.
Ensure proper ventilation
Use the laser in a well-ventilated environment. Fumes and particulates from cutting or engraving can be harmful. We recommend having a fume extraction system or having an open door or window to provide ventilation.
Wear Eye Protection
Wear compatible laser safety goggles or glasses. Not wearing appropriate eye protection may cause permanent eye damage.
The FDA recommends no more than 5 mw to avoid eye damage. The glasses sold are rated for 0.007 mw or over 700 times better at reducing laser exposure significantly more than the minimum requirement.
Cut only laser safe materials
Never cut materials that can generate toxic fumes or are dangerous to cut, such as
Integrated Driver Safety Features
Key Switch: This key is needed to enable the laser. Once the key switch is turned on, the laser is enabled and the key cannot come out. Only when the driver is off can You can only remove the key.
Remote Interlocks: This allows for additional switches to be added to the laser. An E-stop or other system can be implemented to shut the laser down in the case of an emergency.
Power Fault Protection: If the driver ever loses power the laser will turn off. In case of a power outage, you can have peace of mind knowing that the laser is off whenever power returns.
Emission Indicator: The small LED on the LaserBeam driver will notify you if the laser is on. This becomes useful if operating outside the visible light spectrum
The LaserBeam has a 90 day warranty once it’s received.
We want you to have a great experience with our products, so if any parts are found to be missing or damaged, please email us. We will ensure that you receive the support you need to restore your LaserBeam to operating condition or provide a full or partial refund.
You may cancel an order or pre-order if it has not shipped yet, please contact us if you wish to do so. We do not offer returns for LaserBeams that have already shipped.
General Warranty and Limits of Service:
Throughout this policy the words “we”, “us” and “our”, or “Sienci Labs” will be used to refer to Sienci Labs Inc. herein and “LaserBeam” or “machine” will refer to Sienci Labs’ LaserBeam Module, LaserBeam driver and LaserBeam Module Mounting Plate. Additionally, the words “you”, “your”, “user”, and “operator” will refer to the original purchaser/customer, user, or viewer of any of the products or media provided by or through Sienci Labs
This warranty does not cover damage due to improper use or assembly, lack of maintenance, normal wear and tear, or modifications to the LaserBeam which are not produced or authorized by the Company.
This warranty will become void if the operator does not follow the Safety Warnings and Guidelines, uses the Product for illegal purposes, or intentionally causes damage to the Product.
The original customer must contact Sienci Labs Inc. within ninety (90) days of receiving their order to make a warranty claim to be eligible for warranty service. Proof of purchase, tracking number, email address, or other material will be used to confirm the original purchasing date and the identity of the original customer. If the damage was due to shipping, original packaging materials must be kept in the original received condition. Photos, videos, written descriptions, and other items may be requested to assess and validate a warranty claim. In the case Sienci Labs Inc. requires the original parts to be returned, the customer is solely responsible for packing all items securely. Damage incurred during return shipping will not be covered by the warranty. A method of payment such as a credit card may be requested by Sienci Labs Inc. to cover shipping costs or damaged items if Products are not eligible for warranty service.