Description
| Material | Tip | # flutes | Flute type | Shank dia [mm] | Cutting dia [mm] | Length [mm] | Cutting length [mm] | Flute angle [°] | Helix angle [°] | Max. material cutting hardness |
| Solid carbide | Flat | 2 | Downcut | 6.35 | 6.35 | 63.5 | 4mm upcut 21mm downcut |
0 | 30 | 55 |
Hover
Hover
Hover
Hover
Hover
Hover
1/4″ Flat Compression End Mill – 1/4″ Shank-2F
$20.99
This 1/4″ Flat Compression End Mill – 1/4″ Shank-2F offer the best of down cut and upcut bits, allowing for upcut flutes on the bottom part of your cut and downcut flutes on the top surface of your material.
Compression bits are excellent for materials that are prone to fuzziness or tear out, such as plywood and pine. It has a 1/4″ shank.
This item contains one (1) end mill per package.
197 in stock
- Description
- Additional information
- Measurements
- Recommended Add-ons & Accessories
- FAQs
- Warranty
- Help & Resources
Additional information
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 3.5 × 0.5 × 0.5 in |
| method-of-qualification | TRANSACTIONAL VALUE |
| origin-criterion | C |
| country | CA |
Measurements
| Material | Tip | # flutes | Flute type | Shank dia [mm] | Cutting dia [mm] | Length [mm] | Cutting length [mm] | Flute angle [°] | Helix angle [°] | Max. material cutting hardness |
| Solid carbide | Flat | 2 | Downcut | 6.35 | 6.35 | 63.5 | 4mm upcut 21mm downcut |
0 | 30 | 55 |
Recommended Add-ons & Accessories
FAQs
Warranty
Consumables such as End Mills that have been opened or used are not covered under our 60-day warranty. Learn more.