Description
- Shipping Dimensions: 203 x 152 x 51mm (8″x6″x2″)
- Shipping Weight: 0.32kg (0.7 lb)
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
AutoZero Touch Plate
$86.99
|
|
|
The AutoZero Touch Plate is Siencis revolutionary CNC touch plate design that allows for automatic zero-setting with both straight and irregularly shaped bits (v-bits, ball nose, and tapered) in all X, Y, and Z directions for a fully streamlined probing experience:
- Skips the process of measuring or assuming the tool size before probing
- No more need to probe with a straight edged bit to find zero before starting a 3D contour or v-carve
- Corner cutout allows tool to go to zero to confirm successful probing
Unlike most conventional touch plates, the AutoZeros unique chamfered-edge geometry, symmetry, and tall walls means it can automatically measure and calculate the size and position of the bit you’re using very accurately. Plus, with our gSender control software users can run all functions through pre-built settings to have a seamless zeroing experience without having to mess around with custom macros.
- Special nickel coating allows for higher surface conductivity to improve touch-off sensitivity
- Each set comes with a 5ft cable with a strong neodymium magnet and gold plated 5mm ECS5 jack for easy connections to two spots on the touch plate
- Guaranteed compatibility for the LongMill and AltMill CNC and likely compatible with other CNC routers with 2-wire, NO probe connections (like Shapeoko, 3018, etc.)
- Works seamlessly out-of-the-box with the gSender CNC control software
- Macros and documentation available for other senders too like CNCjs, LinuxCNC, Buildbotics, UGS, and more…
- Currently set up for Front, Left corner probing only – support for other options coming to gSender soon
See more on assembling and using the AutoZero here: https://resources.sienci.com/view/lmk2-touch-plate/#autozero-touch-plate
Replacement touch plate cables can be found here: https://sienci.com/product/touch-plate-cable/
1172 in stock
Additional information
| Weight | .7 lbs |
|---|---|
| Dimensions | 4 × 6 × 0.5 in |
| method-of-qualification | TRANSACTIONAL VALUE |
| origin-criterion | C |
| country | CA |
156 reviews for AutoZero Touch Plate
| 5 star | 76% | |
| 4 star | 14% | |
| 3 star | 2% | |
| 2 star | 3% | |
| 1 star | 3% |
Showing 4 of 156 reviews (3 star). See all 156 reviews
Only logged in customers who have purchased this product may leave a review.
Bob (verified owner) –
I have had some issues with the touchplate and have gone back to paper. Twice during it’s setup it jammed into the touchplate.
Russell Kalis (verified owner) –
I have found that I don’t really need this.
David Stokely (verified owner) –
I am having trouble with the touch plate. Most of the time it seems easier to zero everything out manually. I may be doing something wrong, but sometimes it works and other times the tool rapids into the side of the plate knocking if off the piece, so I don’t know. I’ll investigate further when I have time.
Jack Conrad (verified owner) –
Don’t use it much since I always start jobs from the center,because every time I tried to run a job from the lower left the carves were cutting out of alignment, with what was displayed in preview, using easel so far. Also seems a bit pricey.