Description
- Shipping Dimensions: 203 x 152 x 51mm (8″x6″x2″)
- Shipping Weight: 0.32kg (0.7 lb)
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
Hover
AutoZero Touch Plate
$87.99
|
|
|
The AutoZero Touch Plate is Siencis revolutionary CNC touch plate design that allows for automatic zero-setting with both straight and irregularly shaped bits (v-bits, ball nose, and tapered) in all X, Y, and Z directions for a fully streamlined probing experience:
- Skips the process of measuring or assuming the tool size before probing
- No more need to probe with a straight edged bit to find zero before starting a 3D contour or v-carve
- Corner cutout allows tool to go to zero to confirm successful probing
Unlike most conventional touch plates, the AutoZeros unique chamfered-edge geometry, symmetry, and tall walls means it can automatically measure and calculate the size and position of the bit you’re using very accurately. Plus, with our gSender control software users can run all functions through pre-built settings to have a seamless zeroing experience without having to mess around with custom macros.
- Special nickel coating allows for higher surface conductivity to improve touch-off sensitivity
- Each set comes with a 5ft cable with a strong neodymium magnet and gold plated 5mm ECS5 jack for easy connections to two spots on the touch plate
- Guaranteed compatibility for the LongMill and AltMill CNC and likely compatible with other CNC routers with 2-wire, NO probe connections (like Shapeoko, 3018, etc.)
- Works seamlessly out-of-the-box with the gSender CNC control software
- Macros and documentation available for other senders too like CNCjs, LinuxCNC, Buildbotics, UGS, and more…
- Currently set up for Front, Left corner probing only – support for other options coming to gSender soon
See more on assembling and using the AutoZero here: https://resources.sienci.com/view/lmk2-touch-plate/#autozero-touch-plate
Replacement touch plate cables can be found here: https://sienci.com/product/touch-plate-cable/
Available on backorder
Additional information
| Weight | .7 lbs |
|---|---|
| Dimensions | 4 × 6 × 0.5 in |
| method-of-qualification | TRANSACTIONAL VALUE |
| origin-criterion | C |
| country | CA |
165 reviews for AutoZero Touch Plate
| 5 star | 76% | |
| 4 star | 13% | |
| 3 star | 3% | |
| 2 star | 3% | |
| 1 star | 3% |
Only logged in customers who have purchased this product may leave a review.
Donald M. (verified owner) –
This is perfect for zeroing out the bit.
Bruce Gay (verified owner) –
The auto zero touch plate is a game changer!! Very nicely machined and the coating is awesome!
Scott Crowell (verified owner) –
I love it. My only issue with it that it would be nice if xyz wasn’t so deep. Many jobs I run are with 1/16″ bits that need to be chucked up high so the bit doesn’t break. I’m only able to zero the zed axis with these bits. Should consider changing things to allow for xyz with shallow clearance
Dale S. (verified owner) –
It zero\’s the z and y axis but crashes into the touch plate when it dries to zero x. It has broken 2 tools. I have to restore defaults after I run a gcode file to get it to zero any axis. It seems to be taking a long time for you to help me. Its going onto 3 weeks. I have a Longmill 2.5 and am running gsender. I need help.
Willis Blomfelt (verified owner) –
Now it easier to probe cnc. When you use cnc with rubber band and not screw and press to hard it jumper over some steps and you must start from beginning. And it is werry difficulte to try to start from exakt x or y zerro but with auto zerro touch plate you can start exactly posision
Jon K. (verified owner) –
I struggle using it so I end up using paper
RON C. (verified owner) –
The wait time was a lot but I am very happy with the machine. Quality is above expectations and the support has been excellent.
Daniel K. (verified owner) –
Easy and straightforward. I did have a small issue, it took me a couple of tries to get Gsender set up to recognize it.
Bogdan K. (verified owner) –
Nice quality product, will do more review when received machine and start using product.
Guy (verified owner) –
Love what it does.
svein k. (verified owner) –
works great and its very precise. i would have bought it again.
Lynn STAUBER (verified owner) –
Good system
RAYMOND HEINRICH (verified owner) –
works well
Robert B. (verified owner) –
Nice piece of engineering, really hope the next version will work better for smaller, narrower or oddly shaped projects.
Gary Hartings (verified owner) –
I like it. I have had a couple of occasions where I set the Z then started to cut. It was too deep so I checked Z0 and it was below the material surface. Re-zeroed it an it was fine. Now I double check Z0 before start my cut.