Description
Quantity: 1pc
Material: Delrin
Threading: T12 12mm 4 start
Pitch: 2mm/rotation
Hover
Hover
T12 Spring Loaded Anti-Backlash Nut (1pc)
$9.99
This T12 Spring Loaded Anti-Backlash Nut is compatible with the T-12 lead screw used on the 48″ X-axis on the LongMill MK1 and MK2 machines.
The springs are designed to radially load the lead screws to adjust for backlash, leading to smoother movement and no adjustments after assembly, and the nut provides high precision and repeatability with near-zero play or slop in the linear motion.
***Compatible with LongMill MK1 & MK2 on the 48″X-axis***
This item contains 1 Block.
789 in stock
- Description
- Additional information
- Measurements
- Recommended Add-ons & Accessories
- FAQs
- Warranty
- Help & Resources
Additional information
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 4 × 6 × 1 in |
Measurements
Quantity: 1pc
Material: Delrin
Threading: T12 12mm 4 start
Pitch: 2mm/rotation
Recommended Add-ons & Accessories
FAQs
Warranty
Consumables such as Anti-Backlash Nuts that have been opened or used are not covered under our 60-day warranty. Learn more.
Help & Resources
- For the LongMill to work properly, you should only use one set of nuts at any given time. Make sure to remove the old nuts, keeping all of the nuts and bolts as you will need them to install the new ones
- Install Nuts on the X, Y, and Z Gantry as Shown.
- Installing Anti-Backlash Nuts