AutoZero Touch Plate zoom

Hover

IMG_3731 zoom

Hover

AutoZero Touch Plate zoom

Hover

IMG_3719 zoom

Hover

IMG_3725 zoom

Hover

IMG_3594 zoom

Hover

IMG_3612 (1) zoom

Hover

AutoZero Touch Plate Cables 2 zoom

Hover

IMG_3573 (1) zoom

Hover

AutoZero Touch Plate zoom

Hover

IMG_3695 zoom

Hover

AutoZero Touch Plate Cables zoom

Hover

AutoZero Touch Plate 3 zoom

Hover

IMG_3693 (1) zoom

Hover

IMG_3689 zoom

Hover

AutoZero Touch Plate Cables 3 zoom

Hover

AutoZero Touch Plate Compatibility 1-3 zoom

Hover

AutoZero Touch Plate Compatibility 2-3 zoom

Hover

AutoZero Touch Plate Compatibility 3-3 zoom

Hover

AutoZero Touch Plate
IMG_3731
AutoZero Touch Plate
IMG_3719
IMG_3725
IMG_3594
IMG_3612 (1)
AutoZero Touch Plate Cables 2
IMG_3573 (1)
AutoZero Touch Plate
IMG_3695
AutoZero Touch Plate Cables
AutoZero Touch Plate 3
IMG_3693 (1)
IMG_3689
AutoZero Touch Plate Cables 3
AutoZero Touch Plate Compatibility 1-3
AutoZero Touch Plate Compatibility 2-3
AutoZero Touch Plate Compatibility 3-3
Full Screen

AutoZero Touch Plate

(314 customer reviews)

$87.99

The AutoZero Touch Plate is Sienci’s revolutionary CNC touch plate that allows for automatic zero-setting in all X, Y and Z directions, with both straight and irregularly shaped bits (v-bits, ball nose and tapered.)

Engineered by our team, the AutoZero allows for a fully streamlined probing experience:

  • Skip the process of measuring or assuming the tool size before probing
  • No more need to probe with a straight-edged bit to find zero before starting a 3D contour or v-carve
  • Corner cutout allows tool to go to zero to confirm successful probing

Unlike most conventional touch plates, the AutoZero’s unique chamfered-edge geometry, symmetry and tall walls allows it to automatically measure and calculate the size and position of the bit you’re using, with extreme accuracy. Plus, when combined with our gSender control software, users can run all functions through pre-built settings to have a seamless zeroing experience without having to mess around with custom macros.

***Read Description Below For More Highlights***

Description

Other highlights include:

  • Special nickel coating for higher surface conductivity to improve touch-off sensitivity
  • Each set comes with a 5ft cable with a strong neodymium magnet and gold plated 5mm ECS5 jack for easy connection to two spots on the touch plate
  • Guaranteed compatibility with our LongMill and AltMill CNCs, and likely compatible with other CNC routers with 2-wire, NO probe connections (like Shapeoko, 3018, etc.)
  • Works seamlessly out-of-the-box with the gSender CNC control software
  • Macros and documentation available for other senders too like CNCjs, LinuxCNC, Buildbotics, UGS, and more
  • Currently set up for Front, Left corner probing only – support for other options coming to gSender soon

Additional information

Weight .7 lbs
Dimensions 4 × 6 × 0.5 in
method-of-qualification

TRANSACTIONAL VALUE
origin-criterion

C
country

CA

Measurements

  • Shipping Dimensions: 203 x 152 x 51mm (8″ x 6″ x “)
  • Shipping Weight: 0.32kg (0.7 lb)

AutoZero Touch Plate

Recommended Add-ons & Accessories

FAQs

 

Warranty

Items such as our AutoZero Touch Plate are covered under our 60-day warranty. Learn more.

Help & Resources

 

314 reviews for AutoZero Touch Plate

4.6
Based on 314 reviews
5 star
77
77%
4 star
11
11%
3 star
6
6%
2 star
2
2%
1 star
3
3%

  1. Dean (verified owner) –

    Very easy to use

    (0) (0)

  2. Jesus Lopez (verified owner) –

    This works very well.

    (0) (0)

  3. William Carter (verified owner) –

    Best little accessory ever! Makes setting up the job and bit swap so easy. Couldn’t imagine going back to manually setting the Z with a piece of paper

    (0) (0)

  4. John Ward (verified owner) –

    excellent and well thought out piece of kit

    (0) (0)

  5. Jeff para (verified owner) –

    Think it should be a more realistic price increase over the standard block.
    Works well, but have to hold it when x or y pushes it away from the corner.

    (0) (0)

  6. Peter Zanon (verified owner) –

    Easy to use, intuitive. At start had to ‘reverse’ setting in gSender controls i wrecked a bit when it went up and to right when check a bottom left corner

    (0) (0)

  7. Darius K. (verified owner) –

    Works great, very useful for setup.

    (0) (0)

  8. Scott J. (verified owner) –

    An absolute must have!!! Works great.

    (0) (0)

  9. Allan L. (verified owner) –

    Does what it is meant to do. Seems quite accurate.

    (0) (0)

  10. Michael Gustafson (verified owner) –

    The AutoZero touch plate is great! Elegant thoughtful design and super easy to use.

    This is my first CNC machine and I love it! I own a small business called GustoVans in Spokane Washington that does custom campervan conversions and we are using this awesome machine to increase our efficiency making panels for walls, ceilings, floors, cabinetry and more, so that we can add value and accuracy without increasing prices for our customers. Definitely one of my best purchases of the year! I only wish that I had waited a little while and gotten the 4X8 machine and the ATC system! Sienci Labs is great!

    (0) (0)

  11. Keld Trebbien Daugaard (verified owner) –

    Works as it should, so not problems.

    (0) (0)

  12. Kurt (verified owner) –

    The auto touch zero plate is a must have.

    (0) (0)

  13. Robert R. (verified owner) –

    Excellent tool

    (0) (0)

  14. Terry Jones (verified owner) –

    This thing is super cool! Great time saver and increases accuracy.

    (0) (0)

Only logged in customers who have purchased this product may leave a review.